Reimpro • Stainless Steel Engineering, Manufacturing & Design • Dedicated Craftsmanship and Expertise in Stainless Steel Process Engineering • Tel: 011 824 3532reimpro@reimpro.co.za
02.jpg
10.jpg
17.jpg
24.jpg
 
Tanks & Vessels

Tanks & Vessels

  • Stainless Steel Vessels up to 140,000 Litres at our factory premises
  • Specialized Stainless Steel Vessels
  • Stainless Steel Silos
  • Stainless Steel Balance Tanks
  • Stainless Steel Holding Tanks
  • Stainless Steel Buffer Tanks
  • Stainless Steel Mixing Tanks
  • Stainless Steel Storage Tanks
  • Stainless Steel Jacketed Tanks
  • Stainless Steel Dimple Jacketed Vessels
  • Stainless Steel Chemical Mixing Vessels
  • Stainless Steel Pressure Vessels
  • Stainless Steel Vacuum Vessels

1500 lt dimple tank
66000 lt Storage Vessel
120 lt Mixing Vessel
5000 lt Sand Filter Vessel
Closed loop hot water system
35000 lt Caustic Soda Vessel
1500 lt Dimple Jacketed Mixing Vessel
1200 lt Activated Carbon Filter
  

Technical information:

Material used: From 3CR12, 304L, 316L Stainless Steel

All materials are PVC coated prior to the manufacture process to ensure scratch-free, quality finished products.

Finish:

All products are produced to finishes 0.6Ra where required and specified by client

Legs & Feet

Our tanks are built with different support structures including fabricated box legs, pipe or tubular support legs, side mounted support brackets and ribbed support structures. Most legs are supplied with adjustable feet with distribution pads which enable the tanks to be levelled on sloping floors.

Insulation

To facilitate the tank's product remaining at a constant temperature while being stored, we also offer our clients insulation and cladding around the inner shell, which will also vary subject to the conditions that vessel is placed in, internally, externally, extreme heated process areas and extreme cooled process areas, this will in turn vary the thickness and the density of the cladded insulation used. This is a second skin around the inner shell and insulates the vessels contents from external conditions. The different types of cladding we offer and generally used are air, fibre glass, wool insulation or special insulation required for high process temperatures with varied densities.

If the temperature of the product in the vessel needs to be altered then, we are also able to manufacture heating or cooling jackets, known as dimple jackets which operate under high pressures or if this is not quick enough then we can offer a plate heat exchanger. The dimple jacket is welded to the external part of the inner shell. Steam, hot water, glycol and cold water can be pumped through the jacket at high pressures to increase the heat transfer from product to heating or cooling medium used in the jacket of the vessel. There are various dimple jacket configurations to cater for various pressure and flow conditions. Once the dimple jacket has been fitted then a pressure test is carried out to ensure that there are no leaks present.

 
© Copyright Reimpro ® • All Rights Reserved • E&OE